某发动机调节器自动检测异常故障分析

针对某型发动机自动调节器自动检测异常的故障现象,对产生发动机自动调节器自动检测异常的原因进行了深入地研究分析,并提出了针对性的预防措施。     

发动机试验液氢流量测量不确定度评定

针对某型号液体火箭发动机试验,介绍了液氢低温流量测量系统组成及原理。根据液氢质量流量测量数学模型,分析影响液氢流量测量不确定度的主要压力对贮箱容积的影响因素,依据不确定度评定相关标准和方法,对各种影响因素进行分析,最终得出液氢质量流量扩展不确定度为±0.88%,满足发动机设计部门对液氢低温质量流量测量不确定度±1%的要求。     

Thermal-structural analysis of regenerativelycooled thrust chamber wall in reusable LOX/Methane rocket engines

To predict the thermal and structural responses of the thrust chamber wall under cyclic work,a 3-D fluid-structural coupling computational methodology is developed.The thermal and mechanical loads are determined by a validated 3-D finite volume fluid-thermal coupling computational method.With the specified loads,the nonlinear thermal-structural finite element analysis is applied to obtaining the 3-D thermal and structural responses.The Chaboche nonlinear kinematic hardening model calibrated by experimental data is adopted to predict the cyclic plastic behavior of the inner wall.The methodology is further applied to the thrust chamber of LOX/Methane rocket engines.The results show that both the maximum temperature at hot run phase and the maximum circumferential residual strain of the inner wall appear at the convergent part of the chamber.Struc tural analysis for multiple work cycles reveals that the failure of the inner wall may be controlled by the low-cycle fatigue when the Chaboche model parameter γ3 =0,and the damage caused by the thermal-mechanical ratcheting of the inner wall cannot be ignored when γ3 ＞ 0.The results of sen sitivity analysis indicate that mechanical loads have a strong influence on the strains in the inner wall.     

面向客机总体设计的涡扇发动机分析模型

建立一种用于估算涡扇发动机特性的工程分析模型，该模型以涡喷发动机推力估算模型与涡扇发动机效率分析方法为基础，引入高涵道比涡扇发动机的循环分析方法进行修正。利用该模型可以获取涡扇发动机的推力和油耗特性，进而考察总体循环参数对发动机性能的影响。通过与文献验证数据对比，判定了分析模型的精度。该模型只需要输入少量参数就可以快速完成计算过程，适合于飞机总体设计阶段，可以评估涡扇发动机参数对飞机性能的影响。     

发动机不可控高推力适航部分豁免方法研究

介绍了发动机不可控高推力(UHT)问题的产生背景,论述了申请§25.901(c)条款有关不可控高推力的部分豁免的思路和方法.结合FAA关于不可控高推力的指导材料,给出了有关不可控高推力的持续适航工作建议,对于飞机申请§25.901条款有关不可控高推力的部分豁免具有一定的指导意义     

ENERGY-SAVING MATCHING STRATEGY AND EXPERIMENTAL STUDY OF PUMPING SYSTEM FOR TRUCK-MOUNTED CONCRETE PUMP

Aiming at the high fuel consumption and use-cost of truck-mounted concrete pump , an energy-saving matching strategy of pumping system is presented and the experimental study is conducted.Since pumping system occupies most resources of engine , the matching strategy between engine and main pump is analyzed to meet the load demand and reduce the engine rational speed drop.The testing method is established to measure the fuel consumption of engine under various working conditions , and the experimental data are analyzed to find the law of the fuel consumption of engine.The system performance can be improved by adjusting the system input value.Finally , the energy-saving matching strategy is established to reduce the fuel consumption of truck for unit workload , which provides a new approach for the energy-saving of truck-mounted concrete pump.     

虑及多转速的核心机转子高速动平衡试验

为满足航空发动机整机动平衡对转子不平衡振动精稳抑制的需求，采用虑及多转速状态的转子高速动平衡优化配平方 法，开展了核心机转子动平衡试验。以核心机转子系统为对象，研究在高压压气机转子第4、9级盘上配重抑制高压涡轮振动的可 行性。综合考虑核心机转子在多转速下的振动状态，以残余振动平方和及残余振动最大值为目标函数，采用优化算法对配平方案 进行优化，制定了核心机转子高速动平衡方案。在核心机转子系统试验台上分别进行了单平面-单转速、单平面-多转速、双平面- 单转速以及双平面-多转速动平衡的试验。结果表明：采用虑及多转速状态的转子高速动平衡优化配平方法能使因不平衡引起的 核心机转子振动在工作转速区间内均有所减小。     

变推力液体火箭发动机中针栓喷注器研究综述

为总结变推力液体火箭发动机中针栓喷注器的研究成果和梳理未来的发展方向，本文综述了该领域的研究进展。首先介绍了针栓喷注器的基本概念和研究意义，然后从设计原理、工程研制、雾化特性和燃烧特性等方面介绍了针栓喷注器的研究历史和现状，最后展望了针栓喷注器的发展趋势及需要研究的一些科学问题。分析表明，液液针栓喷注器、气液针栓喷注器的雾化特性和燃烧特性都还需持续开展研究。雾化特性中特别需要关注的是雾化角、混合特性和下漏率，还要探索针栓喷注器在反压下的雾化特性。燃烧特性中需要深入研究温度分布、火焰结构和燃烧稳定性。     

Coupled Lagrangian impingement spray model for doublet impinging injectors under liquid rocket engine operating conditions

To predict the effect of the liquid rocket engine combustion chamber conditions on the impingement spray, the conventional uncoupled spray model for impinging injectors is extended by considering the coupling of the jet impingement process and the ambient gas field. The new coupled model consists of the plain-orifice sub-model, the jet-jet impingement sub-model and the droplet collision sub-model. The parameters of the child droplet are determined with the jet-jet impingement sub-model using correlations about the liquid jet parameters and the chamber conditions.The overall model is benchmarked under various impingement angles, jet momentum and offcenter ratios. Agreement with the published experimental data validates the ability of the model to predict the key spray characteristics, such as the mass flux and mixture ratio distributions in quiescent air. Besides, impinging sprays under changing ambient pressure and non-uniform gas flow are investigated to explore the effect of liquid rocket engine chamber conditions. First, a transient impingement spray during engine start-up phase is simulated with prescribed pressure profile. The minimum average droplet diameter is achieved when the orifices work in cavitation state, and is about 30% smaller than the steady single phase state. Second, the effect of non-uniform gas flow produces off-center impingement and the rotated spray fan by 38°. The proposed model suggests more reasonable impingement spray characteristics than the uncoupled one and can be used as the first step in the complex simulation of coupling impingement spray and combustion in liquid rocket engines.     

柔性接头角刚度及弹性件剪切应变的精确计算

角刚度（又称弹性比力矩）及弹性件在最大摆角下的剪切应变是固体发动机柔性接头设计的重要指标。在考虑固体火箭发动机柔性接头层弹性件几何尺寸的差异的基础上，推导了角刚度及弹性件剪切应变的精确计算公式。算例表明，该方法计算精度更高。